B-7 Alloy
Melted and Made in USA
Below is a chart of all B-7 Alloy Steel right hand threaded rods, all made in the USA to ASTM F1554 specifications. Any threaded rod not in stock can be made to order to your exact specification.
All stock threaded rod can be cut to size, chamfered and/or chisel pointed. Any threaded stud not stocked as hot dipped galvanized can be made to order from plain stock and galvanized after fabricating.
Right Hand Threaded Rods
Melted and Made in USA
| Diameter | Thread Pitch UNC | Length in Bulk Stock | Plain Finish | Zinc Blue | Hot Dip Galvanized | |
| 1/2" | 13 | 6' | x | |||
| 1/2" | 13 | 12' | x | |||
| 5/8" | 11 | 6' | x | |||
| 5/8" | 11 | 12' | x | |||
| 3/4" | 10 | 6' | x | x | ||
| 3/4" | 10 | 12' | x | x | ||
| 7/8" | 9 | 6' | x | |||
| 7/8" | 9 | 12' | x | |||
| 1" | 8 | 6' | x | x | ||
| 1" | 8 | 12' | x | x | ||
| 1-1/8" | 7 | 6' | Made to order | |||
| 1-1/8" | 7 | 12' | Made to order | |||
| 1-1/4" | 7 | 6' | x | x | ||
| 1-1/4" | 7 | 12' | x | x | ||
| 1-1/2" | 6 | 6' | x | x | ||
| 1-1/2" | 6 | 12' | x | x | ||
| 1-3/4" | 5 | 6' | x | x | ||
| 1-3/4" | 5 | 12' | x | x | ||
| 2" | 4.5 | 6' | x | x | ||
| 2" | 4.5 | 12" | x | x |