Steel Manufacturing Blog: Keeping it Steel

Weld Studs for Concrete Anchors and Shear Connections: Stock and Custom Options

Posted on Mon, Dec 09, 2024 @ 11:00 AM

Concrete Anchors – Shear Studs – Fully / Partial Thread

weld studsAdvances in Engineering and Architecture have steel and concrete connections being used more often and in new ways.

Whenever possible the Weld Studs or Rebar Anchors are welded to Columns and Beams at the fabricating shop. The call outs involve standard Weld Studs, shown below, but are also incorporating new designs that require studs being made to order.

 

                                              Fig. 1

Weld Stud - Shear Connector 190 x 300Carbon Steel Shear Connectors
Material: ASTM A29/A109 1010, 1020
Diameters from 3/4” to 1-1/4”
Stock Lengths from 2-3/16” to 12-3/16

                                                                                      Fig. 2Weld Stud - Headed Concrete Anchor

Carbon Steel Concrete Anchor
Material: ASTM A29/A109 1010, 1020 Diameters from 1/4” to 5/8”
Stock Lengths from 1-1/8” to 12-1/8” All Weld Studs and Shear Connectors can be made from Stainless Steel when required.

Specialty Weld Studs are available in any configuration or dimensions.

 

 

 

Fig. 3

Weld Stud - Full ThreadFully Threaded

                                                             Fig. 4   

                                                                        Partial ThreadWeld-Stud---Partial-Thread-139-x-300

 

 

 

Fig. 5

Weld-Stud---Partial-Thread-w-Shoulder-128-x-300Partial Thread with Shoulder

 

Fig. 6   

Internal ThreadWeld-Stud---Internal-Thread-Front-and-Rear-298-x-263

 

 

 

 

 

                                                               Standard Concrete Anchors and Shear Connectors are in stock ready for same day shipment.

For any special material or configuration contact us at;

Ph: 631-212-3236

Email: info@thesteelsupplyco.com